WTS-BNC-CR3-7 3.7mm BNC Lead Cable Clamp Set

WTS-BNC-CR3-7 BNC Lead Cable Clamps

This BNC Lead Cable Clamp set consists of a 4 x 4 way friction clamps designed to be used with BNC leads of 3.7mm Outside Diameter (OD). The clamp has double magnets mounted on the rear to enable them to be secured against a metal object.  The magnets combined have a pulling force of 1.8kg.

The clamps are ideal for use in an automotive environment with our 7086 BNC oscilloscope leads, MODIS 3m Scope Leads or those provided with the range of Picoscope automotive oscilloscopes. 

Amp Clamp Options

Also available is an additional clamp piece that fits into one of the clamp jaws that will enable the clamping of cables from either a Pico amp clamp, Pico+ amp clamp or a SnapOn amp clamp.  Two amp clamp pieces are supplied when ordered.  Select option by using the drop down box.

The clamp clamp allows each cable to be pressed into its jaws securing it in place by means of a friction fit.  Using these clamps enables you to keeps your cables tidy and out of the way of harmful moving engine parts or becoming a trip hazard when using long 3m or 5m meter leads.  It also enables you to conduct short test drives with connections in place.

 Note that the clamps should not be placed on to hot surfaces.

The colour of product may vary.